Reverse Signal Circuit
DESCRIPTION
The radio and display receiver assembly receives a reverse signal from the BKUP LP relay.
WIRING DIAGRAM
PROCEDURE
(a) Move the shift lever to R and check if the back-up lights come on.
OK:
The back-up lights come on.
| NG |
 | GO TO LIGHTING SYSTEM |
|
OK |
 | |
| 2. |
CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL) |
(a) Disconnect the G3 radio and display receiver assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
|
Tester Connection | Condition |
Specified Condition |
|
G3-28 (REV) - Body ground |
Engine switch on (IG) Shift lever in R |
11 to 14 V |
|
G3-28 (REV) - Body ground |
Engine switch on (IG) Shift lever not in R |
Below 1 V |
| OK |
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
| NG |
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
Satellite Radio Broadcast cannot be Received
CAUTION / NOTICE / HINT
NOTICE:
Some
satellite radio broadcasts require payment. A contract must be made
between a satellite radio company and the user. If the contract expires,
it will not be possible to listen to the broadcast.
PROCEDURE
(a) Check if the vehicle is in an environment where reception is difficult due to something blocking the area above the vehicle.
|
*a | Example |
*b | In a tunnel |
|
*c | In a building |
*d | Under an overpass |
|
*e | In a forest or on tree-lined path |
*f | Between tall buildings |
|
*g | Under a cliff or overhang |
- | - |
HINT:
If the area above the vehicle is blocked, such as when in a building or tunnel, reception may not be possible.
OK:
Area above vehicle is not blocked.
| NG |
 | END (MOVE VEHICLE TO LOCATION WHERE RECEPTION IS BETTER) |
|
OK |
 | |
| 2. |
CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY |
(a) Check if CH001 (free broadcast) can be received.
OK:
CH001 can be received.
| NG |
| GO TO STEP 6 |
|
OK | |
| |
(a) Check the display screen.
|
Result | Proceed to |
|
"SAT Ch Unauth" is displayed. |
A |
| "-----" is displayed. |
B |
| None of the displays above are shown. |
C |
| B |
| THERE IS NO SONG/PROGRAM TITLE OR ARTIST NAME/FEATURE ASSOCIATED WITH CHANNEL AT THAT TIME |
| C |
| GO TO STEP 6 |
|
A | |
| |
| 4. |
CHECK CONTRACT CONDITIONS |
(a) Check if the pay-type contract has been extended, or if the contract period has ended.
OK:
Pay-type contract is valid.
| NG |
| TO RECEIVE PAY-TYPE BROADCASTS, CONTRACT MUST BE MADE WITH SATELLITE RADIO COMPANY |
|
OK | |
| |
| 5. |
PERFORM ACTIVATION REFRESH |
(a) Perform activation refresh by referring to the satellite radio company web site (http://www.siriusxm.com).
OK:
Malfunction disappears.
HINT:
The
SiriusXM radio ID that is necessary to perform activation refresh is
displayed when CH000 is selected on the satellite radio.
| OK |
| END |
| NG |
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
(a) Check the display screen.
|
Result | Proceed to |
|
"SAT Ck Antenna" is displayed. |
A |
| "SAT No Signal" is displayed. |
B |
| "Loading" is displayed. |
|
"SAT Ch Off Air" is displayed. |
C |
| After "SAT Ch Unavail" is displayed, display automatically switches to CH001. |
D |
| None of the displays above are shown. |
E |
| B |
| END (MOVE VEHICLE TO LOCATION WHERE RECEPTION IS BETTER) |
| C |
| CHANNEL
IS CURRENTLY NOT BEING BROADCASTED. BROADCAST CAN BE LISTENED TO OR
VIEWED WHEN IT IS BACK ON AIR. (CHECK WITH RADIO STATION) |
| D |
| CHANNEL BROADCAST HAS ENDED (CHECK WITH RADIO STATION) |
| E |
| GO TO STEP 11 |
|
A | |
| |
| 7. |
REPLACE NO. 4 ANTENNA CORD SUB-ASSEMBLY |
(a)
Replace the No. 4 antenna cord sub-assembly with a new or known good
one and check if radio broadcasts can be received normally.
Click here
OK:
Radio broadcasts can be received normally.
| OK |
| END |
|
NG | |
| |
| 8. |
REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY |
(a)
Replace the No. 3 antenna cord sub-assembly with a new or known good
one and check if radio broadcasts can be received normally.
Click here
OK:
Radio broadcasts can be received normally.
| OK |
| END |
|
NG | |
| |
| 9. |
REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY |
(a)
Replace the No. 2 antenna cord sub-assembly with a new or known good
one and check if radio broadcasts can be received normally.
Click here
OK:
Radio broadcasts can be received normally.
| OK |
| END |
|
NG | |
| |
| 10. |
REPLACE TELEPHONE ANTENNA ASSEMBLY |
(a) Replace the telephone antenna assembly with a new or known good one and check if radio broadcasts can be received normally.
Click here
OK:
Radio broadcasts can be received normally.
| OK |
| END |
| NG |
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
| 11. |
CHECK CURRENTLY SELECTED CHANNEL |
(a) Check if CH000 is currently selected.
OK:
CH000 is selected.
| OK | |
END (CH000 HAS NO SOUND. SELECT ANOTHER CHANNEL.) |
| NG |
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
