Toyota Avalon (XX50): Cellular Phone Inspection. Cellular Phone Registration Failure. Data List / Active Test

Cellular Phone Inspection

PROCEDURE

(a) Check that the vehicle and cellular phone meet the following conditions:

NOTICE:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

• The cellular phone is "Bluetooth" compatible.

  Click here

• The cellular phone is registered as a hands-free device.
• "Bluetooth" setting of the cellular phone is on.
• Operating system and software of the cellular phone are the latest versions.
• There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
• The "Wi-Fi" setting of the cellular phone is off.
• The "Wi-Fi" tethering setting of the cellular phone is off.

(b) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

A

END

B

(a) Restart the cellular phone.

(b) Turn the engine switch off.

(c) Turn the engine switch on (ACC).

(d) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

A

END

B

(a) Check if the in-vehicle device can be recognized by the cellular phone.

B

GO TO STEP 5

A

(a) Clear all "Bluetooth" devices registered to the cellular phone and the radio and display receiver assembly.

(b) Register the cellular phone again.

(c) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

A

END

B

(a) Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

HINT:

• Make sure to obtain the customer's permission to perform this procedure.
• After the inspection, clear the registered information and usage history acquired during the inspection.

A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

B

(a) Check if the system functions normally using another "Bluetooth" compatible cellular phone.

HINT:

• Make sure to obtain the customer's permission to perform this procedure.
• After the inspection, clear the registered information and usage history acquired during the inspection.

A

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

B

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

Cellular Phone Registration Failure

CAUTION / NOTICE / HINT

NOTICE:

• Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

  Click here

• When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
  • A communication malfunction DTC may be stored.
  • The radio and display receiver assembly may not operate normally.

PROCEDURE

(a) Check that the vehicle and cellular phone meet the following conditions:

NOTICE:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

• The cellular phone is "Bluetooth" compatible.

  Click here

• "Bluetooth" setting of the cellular phone is on.
• Operating system and software of the cellular phone are the latest versions.
• There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
• The "Wi-Fi" setting of the cellular phone is off.
• The "Wi-Fi" tethering setting of the cellular phone is off.

(b) Register the cellular phone again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

A

END

B

(a) Restart the cellular phone.

(b) Turn the engine switch off.

(c) Turn the engine switch on (ACC).

(d) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

A

END

B

(a) Place the cellular phone close to the radio and display receiver assembly.

(b) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

A

END

B

(a) Clear all "Bluetooth" devices registered to the cellular phone and the radio and display receiver assembly.

(b) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

A

END

B

(a) Restart the cellular phone.

(b) Turn the engine switch off.

(c) Turn the engine switch on (ACC).

(d) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

A

END

B

(a) Check if the cellular phone can be registered normally to another "Bluetooth" compatible vehicle of the same model.

HINT:

• Make sure to obtain the customer's permission to perform this procedure.
• After the inspection, clear the registered information and usage history acquired during the inspection.
• If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

B

(a) Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.

HINT:

• Make sure to obtain the customer's permission to perform this procedure.
• After the inspection, clear the registered information and usage history acquired during the inspection.
• If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

A

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Navigation System / Data List.

(e) Read the Data List according to the display on the Techstream.